User's Manual

7
Setting the TCP/IP : In Case of the LAN Driver
1. Click Start *
**
* Setting *
**
* Control Panel.
2. In the <Control Panel> window, double-click the
Network icon.
3. The <Network> window appears. Select ‘Conexant
AccessRunner PCI ADSL LAN Adapter’ and click
the [Properties] button.
4. <TCP/IP Properties> window appears. Click the ‘IP
address’ tab. Click ‘Specify an IP address’ and
enter the IP address in the ‘IP Address’ field and
enter the subnet mask in the ‘Subnet Mask’ field.
) Contact your Internet service provider (ISP) for an IP
address and subnet mask.
) If the DHCP server is enabled, click ‘Obtain an IP address
automatically’ item.
5. Click ‘Gateway’ tab. Enter the IP address of the
gateway in the ‘New gateway’ field and click [Add]
button. And then, click [OK].
6. The system prompts you to reboot. Click [YES] to
reboot the system.
7. After booting the system, you can connect the internet.
Select this item,
And click [Properties].
Enter an IP address and subnet mask.
Enter the IP address of the gateway,
And click [Add] button.
Click this item.