User's Manual

6
Setting VPI and VCI
1. Click Start *
**
* Setting *
**
* Control Panel.
2. Double-click Conexant AccessRu… icon in <Control Panel> window.
3. <Conexant AccesssRunner PCI ADSL WAN
Adapter Properties> window appears. Press
the [Alt + P] keys simultaneously.
4. Then, several tabs are added to the
<Conexant AccesssRunner PCI ADSL WAN
Adapter Properties> window. lick Setup tab
and specify the VPI and VCI values in the
Virtual Path Identifier and Virtual
Connection Identifier field.
Click the [Apply] button and click [OK].
) Contact your ADSL server provider for the VPI
and VCI.
Creating a New Connection Profile : In case of the WAN Driver
Create and save a connection profile for each dial-up session so that you do not have
to re-enter the same information each time you connect to your corporate LAN or ISP.
1. Double-click My Computer icon. The My Computer window appears.
2. Double-click the Dial-Up Networking icon in <My Computer> dialog box.
3. <Dial-Up Networking> window appears. To
create a new connection profile, double-click the
Make New Connection icon.
4. The <Make a New Connection> wizard appears.
Enter a name for the connection in the ‘Type a
name for the computer you are dialing' field
and select ‘Conexant AccesssRunner PCI ADSL
WAN Adapter’ from the ‘Select a modem’ drop-
down menu. And then, click [Next>].
5. The window for specifying the phone number appears. Enter any number in the
‘Area code’ and ‘Telephone number’ fields. And click [Next>].
) Because ‘Area code’ and ‘Telephone number’ are not related to the ADSL modem, you can
enter any values in these fields.
6. A message states that you have successfully created a new connection. Click
[Finish
]
to save the connection profile in the Dial-Up Networking folder.
7.
You can see a new connection icon under the <Dial-Up Network> window.
Enter VPI.
Enter VCI.