User's Manual

10
user name and password provided by your Internet server provider and click
[Next>].
10. The window for specifying the connection name for dial-up connection appears.
Enter the name of the connection used for connecting the network later and click
[Next>].
11. <Internet Connection Wizard> prompts you the completing the wizard. Click
[Finish] button. And you can connect the Internet from now on.
Setting the TCP/IP : In Case of LAN Driver
1. Click Start, point to Settings, and then click Network and Dial-up Connections.
2. <Network and Dial-up Connections> window appears. Right-click the icon and click
Properties menu.
3. <Local Area Connection Properties> window appears. Click the Internet Protocol
(TCP/IP) in the ‘Components checks are used by this connection’ list and click
[Properties] button.
4. <Internet Protocol(TCP/IP) Properties>
window appears. Click ‘Use the following
IP address’ and enter an IP address and
Default gateway address in the IP address
field and Default gateway field.
) Contact your Internet service provider (ISP) for
an
IP address and subnet mask.
) If the DHCP server is enabled, click ‘Obtain an
IP address automatically’ item.
5.
<Local Area Connection Properties> window appears. Click [Close].
Enter IP address and default gateway address