User's Manual Part 2

44
A D S L M o d e m
M a n u a l
⑸ Now, execute Ping test for VisionNet 708.
① Clink [ Start → Run. When a dialogue box appears, input [ Ping 10.0.0.2] and
press Enter.
Execution screen of [ping <IP address of VisionNet 708>]
② If
[Request timed out]
message appears, turn off the power switch of VisionNet
708 and turn the power back on. Repeat the process from the step (3) one more
time. If the result is the same, contact the store where you purchased VisionNet 708.
③ If [ Reply from <IP Address>: bytes=32 time<10ms TTL=128] message appears,
it means that the connection between VisionNet 708 and LAN card is normal, but
there is a problem with the setup of VisionNet 708. C ontac t the store where you
purchased VisionNet 708.
Q ) T h e r e i s n o p o w e r s u p p l y o n t h e p r o d u c t .
A) ⑴ Check if the power switch on the rear panel of VisionNet 708 is
O N .
⑵ Chec k if power cable is loosely inserted in power input port, and check if power
adapter is inserted in the outlet
⑶ Check if the power adapter is the one supplied with the VisionNet 708.
⑷ If your answers to the above three items are not positive, contact the store
where you purc hased VisionNet 708.
Q ) N e t w o r k s p e e d i s t o o s l o w .
A) ⑴ Check if the telephone line coming into your house is not too old.