User's Manual Part 2

A D S L M o d e m

M a n u a l

◈ Verifying the Connection

1 . V e r i f y i n g t h e s t a t e o f V I S I O N N E T 7 0 8 A D S L

☞ Chec k

[ SYNC LED]

that is located on the front panel of VISIONNET 708 ADSL. If

green lamp is lit on SYNC LED, you are c onnec ted to ADS L network.

(If green lamp is blinking, it means the initialization process is going on. If the light

is off, it means you are not connected to ADSL network.)

2 . V e r i f y i n g P C c o n n e c t i o n

☞ Chec k

[LAN LED]

that is located on the front panel of VIS IONNET 708 ADSL. If

green lamp is lit on LAN LED, it means PC is successfully connected to VISIONNET

708 ADSL. You can also check the connection through LEDs on the LAN c ard. (If

green lamp is not lit on both LEDs, it means that PC and VIS IONNET 708 ADSL are

not c onnec ted through Crossover UTP cable. Connect the Crossover UTP c able.)

2 . V e r i f y i n g t h e s t a t e o f t e l e p h o n e

☞ If dial tone is normal when picking up the phone, or if there is no noise or

entanglement of wires when talking over the phone, the connection is normal.

(C hange the micro - filter if the noise is serious. If you cannot hear dial tone, check

the connection between the telephone and [ PONE] port behind the VIS IONNET

708 ADSL.)