User manual

User Manual SCA-SS-70-10
No motion even though enable is on
• Check power supply and the wiring.
• Overheating protection is active.
Overtemperature
• Use an additional heatsink (see accessories).
• Reset the amplifier.
Note:
Beware that the maximal working temperature of 80°C in the driver is not reached;
otherwise the drive will be switched off.
9. Accessories & Options
• Mounting adaptor for Din rail ASX-RM-01-01
• Choke modules IA2100 (with 2 x 50 µH)
and IA2101 (with 2 x 100 µH)
• Braking module ASO-BM-70-30.
ElectroCraft
®
E-Mail: [e-mail] www.electrocraft.com May 2009
41