User manual

User Manual SCA-SS-70-10
5. Explanation of Terminals, Dip Switches, & Potentiometers
5.1 Terminals
Terminal Label Description
XA
Pin 1 & 2 connect to power supply.
Pin 3 & 4 connect to motor.
XB
Pin 5 voltage output +5 VDC.
Pin 6 & 7 input encoder feedback.
Pin 8 signal GND.
Pin 9 output signal Ready.
Pin 10 output signal Error.
Pin 11 signal GND.
Pin 12 input for Disable Fwd.
Pin 13 input for Disable Rev.
Pin 14 input Enable.
XC
Pin 15 voltage output +15 VDC.
Pin 16 signal GND.
Pin 17 voltage output -15 VDC.
Pin 18 & 19 input set value.
Pin 20 & 21 input tacho.
Pin 22 voltage output for current.
Pin 23 signal GND.
Pin 20 voltage output speed monitor.
ElectroCraft
®
E-Mail: [e-mail] www.electrocraft.com May 2009
25