Specifications

Control 24
Menus
Main Menu INFORMA TION
T o open the main menu INFORMA TION, pr ess the right- or left-hand button once.
T
o select the desir ed sub-menu use the up or down button.
Open the menu by pr essing the right-hand button once.
T o r eturn to the main menu, pr ess the left-hand button once.
INFORMATION
OPERATION
HEATCURVE
TEMPERATURE
INTEGRAL
OPER.TIME
RESET
MAN TEST
Sub
menus
Return
Open
next
menu
Sub-Menu OPERATION
This menu is used for the selection of operating mode. The contr ol system allows for five dif fer ent operating
modes:
• OPERA TION AUTO
Heat pump and auxiliary heater ar e r egulated automatically by the contr ol system. The text
“ OPERA TION AUTO” will be displayed on the contr ol panel.
• OPERA TION HEA T PUMP
Heat pump (compr essor) operation is allowed by the contr ol system.
• OPERA TION ADD.HEAT
The auxiliary heater will/will not be allowed to operate. This operating mode is normally used when a new
installation is being put into service, befor e the Brine system is r eady for use.
• OPERA TION WARMWATER
The heat pump will only pr oduce warm water; no heat will be distributed to the heating system. The
text ” OPERA TION WARMWATER “ will be displayed on the contr ol panel.
ON
• OPERA TION HEA T PUMP
Heat pump (compr essor) operation is allowed by the contr ol system.
OFF
not
ON/OFF
• OPERA TION ROOMHEAT
The heat pump
only;
will
be distributed to the h
eating
system
text
” OPERA TION WARMWATER
“
will be displayed on the contr ol panel.
The
The heat pump will not
pr oduce warm water.
OPERATION
AUTO
ROOMHEAT
WARMWATER
HEATPUMP
ADD.HEAT
ON
OFF
DEFROST