User manual
3.1.2.4
Sub-Menu
TEMPERA
TURE
This
menu
shows
the
dif
fer
ent
temperatur
es
of
the
heating
system.
All
temperatur
e
changes
r
egister
ed
over
the
last
60
minutes
ar
e
stor
ed
in
the
contr
ol
system
and
can
be
viewed
in
the
shape
of
graphs.
12
3.1.2.5
Sub-Menu
INTEGRAL
TEMPERATURE
OUT
ROOM
FEED.
RETURN
WARMWT
PIPE
25
28
45
30(65)
22
30(50)
WARMWT ˖ water tank temperature, the first value is water tank real temperature, the second value in
‘ ( )’ is water tank setting temperature; the setting temperature is adjustable from 20 ć to 62ć,factory
setting is 45ć.
ROOM˖ Display room air temperature.
RETURN˖ Display return water temperature.
FEED˖
1.the first value is real feed water temperature, the second value in ‘( )’ is feed water setting
temperature in ROOMHEAT 1 mode, it is adjusted by slope of Curve according to outdoor ambient
temperature. Factory setting is that feed water temperature is 40ć when outdoor ambient temperature is
0ć, that is to say Curve is 40, the value of Curve is adjust from 22ć to 56ć. This setting is only
available for Room heating, not for water tank heating.
2. under ROOMHEAT 2 mode, FEED setting can be adjust directly from 20 to 65ć,factorysetting
is 45ć; this setting is only available for room heating, not for water tank heating.
PIPE
˖Display outdoor unit evaporator temperature (for defrosting)
OUT˖Display outdoor ambient temperature.
When at item WARMWT or RETURN or FEED, or PIPE, press button Right 5 seconds will
display the information as follow kind of chart, to check how the temperature is going in one hour.
INTEGRAL
00
OFF
CMP
.
A
ADD 1
- 60
( 00)
( - 60)
- 500
00
ADD 2
( - 500)
- 550
ADD 3
( - 550) - 600