User manual

3.1.2.3 Sub-Menu HEA T CUR VE
T
his menu is used for making adjustments that af fect the r oom temperature. For mor e information, please r efer
to ”Adjustments to be made r egularly” on page 20.
T able 1: Menu– HEA T CURVE
11
Menu
T
ext Description Ad
j
ustable b
y
CURVE The value enter ed shows the temperatur e of the water
to be distributed to the radiators (feed water
tempe
r
atu
r
e
)
when the outside air temperatu
r
e is 0°C.
used(see ”Adjustment
of
CURVE value” on p20. )
MIN Adjustment of value for lowest feed water temperatur e
allowed.
used(see ”Adjustment
of
MIN & MAX value” on p24.
)
MAX Adjustment of value for highest feed water
temperatur e allowed.
used(see ”Adjustment
of
MIN & MAX value” on p24.
)
CURVE 5 Adjustment of r oom temperatur e when the outside air
tempe
r
atu
r
e is +5°C.
used(see ”Adjustment
of CURVE value” on p20. )
CURVE 0 Adjustment of r oom temperatur e when the outside air
tempe
r
atu
r
e is 0°C.
used(see ”Adjustment
of CURVE value” on p20.
)
CURVE – 5 Adjustment of r oom temperatur e when the outside air
tem
p
e
r
atu
r
e is -5°C.
used(see ”Adjustment
of CURVE .
)
HIGH T STOP
When outdoor ambient temperature is higher than
this setting, the hot water to room will
be stopped.
this setting is adjustable
from 0 to 50ć,factory
setting is 50ć.
LOW T STOP
When outdoor ambient temperature is lower than
this setting, the hot water to room will be stopped.
this setting is adjustable
from 0 to -50 ć,factory
setting is -50ć.
value” on P20
LOW T° STOP
-50
HEATCURVE
CURVE
MIN
MAX
CURVE 5
CURVE 0
CURVE
- 5
40
22
70
0
0
0
HIGH T° STOP
50