User`s guide

5.5.5 Upgrade Firmware
This page allows you to upgrade the Access Point firmware to new version. Please note,
DO NOT power off the device during the upload because it may crash the system.
Current Firmware Version: shows the current firmware version.
Firmware Date: the date that you upgrade the current firmware.
Firmware Upgrade: select the firmware version on your computer then click Apply to
upgrade the firmware version.
5.5.6 Save/Reload Settings
This page allows you to save current settings to a file or reload the settings from the file
which was saved previously. Besides, you can reset the current configuration to factory
default.
Load Settings From Local Hard Drive: if you want to reload the settings from the file
saved before, you could click Select File button to choose the right file then click Load
button.
Restore To Factory Default Settings: this Restore button is provided to allow you to
restore the router settings to the default factory settings.
Click Save Settings To Local Hard Drive can save the settings to your computer.
53
2012-11-22