User`s guide

5.3.3 Wireless Security Settings

This page enables you to set wireless security method that control how the subscriber

station associates to a wireless device and encrypts/decrypts data.

Select SSID: if you have defined many SSIDs, please choose the one that you want to set

security for. By default, it is SERIOUX.

MAC Access Control: you could choose to disable this function, or allow/deny.

Access List: click Add MAC address button, it will show you the following page:

If you choose allow, then type in the MAC address that you want to allow to access your

wireless network. If you choose deny, then enter the MAC address that you deny to access

your wireless network. Click Apply button to make the change work.

5.3.3.1 WEP

WEP (Wired Equivalent Privacy) is based on the IEEE 802.11 standard and uses the RC4

encryption algorithm. Enabling WEP allows you to increase security by encryption data

being transferred over your wireless network. WEP is the oldest security algorithm, and

there are few applications that can decrypt the WEP key in less than 10 minutes.

SRX-WR150WH