User guide

Internet Setting
WAN
This router supports several common types of WAN connections . Select the connection method that
your network operator uses and select the correct parameter information (likely provided by your ISP).
Then, you can share the Internet normally. If you use a dynamic connection, dial-up connection,
PPPoE dial-up connection, etc., there are two ways to verify whether the connection will work. One
way is to browse the web site directly, and the other way is to distinguish it according to the Internet
configuration state.
Successful connection
An ISP may require a binding MAC address, which the ISP will usually offer to you. It may be entered
on the MAC address bar. Otherwise, you may click the Fill my MAC button, in which case the MAC
address of the current connecting host will be automatically filled in the text box for you.
1.Connection Mode DHCP (Auto config)
This connection mode is more convenient because it can obtain information parameters such as
IP and gateway addresses automatically and they can change while the ISP’s operator network
status changes .