User guide

Hardware Install Process
Establish WAN Connection
Connect the WAN port of router to xDSL Modem by a line.
Establish LAN Connection
Connect the port of router to HUB or switch by a line. You also can connect the computer LAN card
directly.
Power Link
Link the power and the router will start automatically
.
Management and Login
You should log into your web page before using the router. Here is an example, using the “Windows XP
Home Edition Service Pack 3”operating system as an example to illustrate the configuration of the
computer process:
1.Check “Network Connections”, making sure that the PC has an installed wireless card. If
there is an icon, like “Local Area Connection 4 Connected” shown in the figure below, the
wireless card has been already installed in the PC.
2.Set your IP address through the properties of “Internet Protocol (TCP/IP)”. Generally, the DHCP
server of the router is on, so please select “Obtain an IP address automatically” and “Obtain DNS
server address automatically”, under the General tab.