User guide

Radius IP Address: Please input IP address of the radius server here.
Radius Port: Please input the port number of the radius server here.
Shared key: The encryption key that the router is authenticated through RADIUS server
Session Timeout: The recertification time interval between the router and the server. The default
value is 3600s.
802.1X
This security mode is used when a RADIUS server is connected to the Router. 802.1x, a kind of Port-
based authentication protocol, is an authentication type and strategy for users. The port can be either a
physic port or logic port (such as VLAN). For wireless LAN users, a port is just a channel.
The final purpose of 802.11x authentication is to check if the port can be used. If the port is
authenticated successfully, you can open this port which allows all the messages to pass. If the
port isn’t authenticated successfully, you can keep this port “disable” which just allows 802.1x
authentication protocol message to pass.
WEP: Select “enable/disable” WEP encryption which indicates the authentication process
between wireless adapter and wireless router.
Radius IP Address: Please input IP address of the radius server here.
Radius Port: Please input the port number of the radius server here.
Shared key: The encryption key that the router is authenticated through RADIUS server
! Note: In order to improve your security level, please do not use a password which is simple or easy
to remember.
Access Policy
You may provide wireless-access setting strategies based on MAC to allow or refuse the access of
selected MAC addresses. Within the same SSID, only the Enable or Disable functions may be set: