User guide

Prompt:
The formula of unit conversion between bandwidth and Kbyte is 1Mbit= 128K byte (kilobyte)
Generally the ADSL ratio of upload and download bandwidth is one to three, upload bandwidth of
1M ADSL is 42Kbyte and the download is 128Kbyte.
Wireless Settings
Basic:
Radio On/Off: Turn the radio on or off.
Network Mode: Choose one of router working modes: 802.11b, 802.11g, 802.11b/g, and 802.11b/g/n.
Network Name (SSID): Network name (32 characters max.) of wireless signals set to
distinguish a separate network.
Broadcast Network Name (SSID): Enable or disable SSID broadcast machine. Select Disable,
The SSID is hidden so that a wireless client will be unable to scan the SSID equipment. The client must
know the equipment SSID before it can communicate with the equipment. (The default is Enabled).
BSSID (Basic Service Set ID): It applies to the MAC address site. In wireless access points, a group
of wireless workstations and wireless LAN workstations called access points (AP) form a basic service
device (BSD). The BSS device of each computer must configure the same BSSID, namely the
wireless- access-point wireless logo.
Frequency (Channel): Select the wireless-network work channel. The two choices are Automatic
Selection and Manual of Choice. Different countries or regions use different channel numbers.
For national or regional settings, please see the section on advanced settings.
Operation Mode: Mixed Mode or Green Field:
Mixed Mode: The former wireless card can identify the Pre-N AP and connect to it but
the transmission will be affected somewhat. (The default is Mixed Mode.)
Green Field: You can achieve a higher transmission rate but it will affect backwards compatibility and
the security of the system.
Channel Bandwidth: Choose 20 or 20/40. (The default is 20/40.)
Guard interval: Choose Long or Auto. (The default is Auto.)
MCS: Modulation Code Lists: The 802.11n standard of the wireless LAN (W LAN)
communications rate. (The default is Auto.)
Reverse Direction Access (RDG): Enable or disable this permission.
Extensions channel: Choose from the defined band expanded channels.
Space Time Block Coding(STBC): Choose Enable or Disable. (The default is Enabled)
Polymerization MAC Business Data Unit (A-MSDU): The multiple Ethernet message is clumped into
a larger load in a certain way. (The default is Disabled)
Auto Block ACK: Choose Enable or Disable. (The default is Enabled)
Decline BA Request: Choose Enable or Disable. (The default is disabled)
HT Disallow TKIP: Choose Enable or Disable. (The default is Enabled)