User guide

4.Connection Mode L2TP
Server IP: Enter the required (not optional) Server IP address, provided by your ISP.
User Name: Enter the required (not optional) L2TP User Name, provided by your ISP.
Password: Enter the required (not optional) L2TP password, provided by your ISP.
Address Mode: Obtain an IP address:
Dynamic: Choose this mode if the router can obtain an IP address automatically.
Static: Choose this mode if your ISP has provided you with a static IP address.
IP Address: Choose “Static” and enter the L2TP IP address provided by your ISP.
Subnet Mask: Enter the Subnet Mask address supplied by your ISP.
Default Gateway: Enter the Default Gateway address supplied by your ISP.
Operation Mode (2 modes):
Keep Alive: The router connects automatically to the LAN when an access request is sent to it. If the
network is disconnected from the router due to external factors, the system will try to connect to the
network at regular intervals until a connection is established.
Manual demand: If the network disconnects from the router, choose this mode to dial manually to the
network.
5.Connection Mode PPTP
If the connection is the PPP Tunneling Protocol, your ISP can provide you with the User Name and
Password . For related parameter settings, please refer to the L2TP mode.