W ireless Router Serioux User Guide Thank you for choosing our wireless broadband router. Before using the router, please read this handbook carefully because it provides every basic setting. If your specification is mentioned in the handbook, the router mentioned refers to the SRX-WR150/300 series wireless router. Pictures of the interface in this manual provide references for users. If the product configuration interface does not provide a reference, you should set up the router according to your needs.
Product Features ◆ Integrates router, wireless access point, four-port switch and firewall in one device ◆ Complies with IEEE802.11n, IEEE802.11b and IEEE802.11g standards ◆ MIMO technology utilizes reflected signal to increase eight times transmission distance of original 802.
transmission range LED Indoor: 300M, Outdoor: 500M (depending on environment) 10Base-T: 3e UTP or above; 100Base-TX: 5e UTP Network Media WLAN Status indicator for W LAN (on/off) WAN Status indicator for WAN LAN WPS Status indicator for LAN WPS indicator POWER Power indicator Operating environment Operation temperature: 0℃～4 5℃ Operating Humidity: 10％～90％( non-condensing) Storage temperature: -4 0℃～7 0℃ Storage Humidity: 5％～90％( non-condensing) External power Power adapter output: DC5V/2A or D
Hardware Install Process Establish WAN Connection Connect the WAN port of router to xDSL Modem by a line. Establish LAN Connection Connect the port of router to HUB or switch by a line. You also can connect the computer LAN card directly. Power Link Link the power and the router will start automatically. Management and Login You should log into your web page before using the router.
Tips: Only when the DHCP server of the router is enabled should you select “Obtain an IP address automatically”. You can set the IP address by yourself instead. However, the IP address of the computer and router should be set within the same subnet and may not share an IP address . The default IP address is 192.168.16.1 and the subnet m ask is 255.255.255.0, so the IP address should not be 192.168.16.1. 3.You can find the assigned address under the Support tab, as follows: 4.
.The browser will open a login window as shown below. Enter admin for the administrator’s User name and admin for the Password. Click on the OK button. 7.Click on the OK button. If the User name and Password are correct, you will enter the WEB settings screen. 8.You have now logged into the settings page successfully. Wizard The router supports various functions and provides a setup wizard. The wizard can guide you to finish the basic settings, even though you may be unfamiliar with the router. 1.
3.You can set a network name and corresponding encryption securit y for your wireless network settings, as shown below. Click on the “Apply” button to submit the setting information. The system will then reboot the router to complete the router’s basic settings.
Operation mode set to Gateway mode: Gateway is the default mode, The yellow Ethernet port is treated as WAN port. The other ethernet ports and the wireless interface are bridged together and are treated as LAN ports (which is used to enable the NAT function to enable the router to transmit information easily with the Internet). Operation mode set to Ethernet converter mode: The wireless interface is treated as WAN port, and the ethernet ports are LAN ports.
Internet Setting WAN This router supports several common types of WAN connections . Select the connection method that your network operator uses and select the correct parameter information (likely provided by your ISP). Then, you can share the Internet normally. If you use a dynamic connection, dial-up connection, PPPoE dial-up connection, etc., there are two ways to verify whether the connection will work.
2.Connection Mode Static (Fixed IP) If your ISP uses the Static IP mode, please choose Static (fixed IP) to set the network parameters. If you are unsure about the mode, please contact your ISP. IP Address: Enter the static IP address provided by your ISP. Subnet Mask: Enter the subnet mask . Gateway: Enter the WAN gateway address. Primary DNS Server: Enter the primary DNS server address provided by your ISP. Secondary DNS Server: Enter the secondary DNS server address. 3.
4.Connection Mode L2TP Server IP: Enter the required (not optional) Server IP address, provided by your ISP. User Name: Enter the required (not optional) L2TP User Name, provided by your ISP. Password: Enter the required (not optional) L2TP password, provided by your ISP. Address Mode: Obtain an IP address: Dynamic: Choose this mode if the router can obtain an IP address automatically. Static: Choose this mode if your ISP has provided you with a static IP address.
LAN Select “Internet Settings | LAN” to set the parameters of the LAN ports (IP address, subnet mask , DHCP, etc.). Hostname: Name of the network to which the router connects. IP Address: LAN IP address of the router. (The default is 192.168.16.1.) Subnet Mask: Subnet mask of the router, according to the network state. (The default is 255.255.255.0.) LAN2: Enable or disable the second LAN port address, according to the request. To enable it, set the IP address and subnet mask of the second LAN port.
DHCP Clients Select “Internet Settings | DH CP clients” to check the related computer information of the DHCP that automatically assigns IP addresses in the LAN (such as network name, MAC address, IP address and expiration time). Advanced Routing This function is an option to add specific routing to a specific hos t if necessary.
Prompt: The formula of unit conversion between bandwidth and Kbyte is 1Mbit= 128K byte (kilobyte) Generally the ADSL ratio of upload and download bandwidth is one to three, upload bandwidth of 1M ADSL is 42Kbyte and the download is 128Kbyte. Wireless Settings Basic: Radio On/Off: Turn the radio on or off. Network Mode: Choose one of router working modes: 802.11b, 802.11g, 802.11b/g, and 802.11b/g/n. Network Name (SSID): Network name (32 characters max.
Advanced Select “Wireless Settings | Advanced” to access the advanced wireless settings interface. It includes advanced parameters like Beacon Interval and transmitting power to set an optimal allocation for your network. Please do not modify the contents unless you are an advanced user. BG Protection Mode: You can select On or Off. (The default is Auto.) Beacon Interval: It can be set to obtain the access interval time of a nearby wireless network. (The default is 100ms.
IEEE 802.11H Support: It is intended to resolve interference issues introduced by the use of 802.11a in some locations, particularly with military radar systems and medical devices. The rules for 802.11h were recommended by the International Telecommunication Union, which is an addition to the 802.11a standards. The 802.11h standard is compliant with European standards on 5GHz wireless LANs. (The default is disabled.
Default key: Select the current default key number. WEP Keys (1 to 4): Set up different keys according to the encryption length and type. There are two kinds of encryption lengths which are available: 64-bit and 128-bit. There are two kinds of key types available: Hex (Hexadecimal) and ASCII. If you use Hex, the key characters can be 0 to 9 and/or A to F. If you use ASCII, then any ASCII characters on the keyboard can be used. If you choose the Hex key type, the key would be 10 or 26-bit hex characters.
WPA-PSK/WPA2-PSK It supports the WPA-PSK /WPA2-PSK encryption so that clients can access the Internet using WPAPSK or WPA2-PSK encryption. Please refer to the WPA-PSK section or the WPA2-PSK section for the setting procedure. WPA This authentication protocol is based on RADIUS server. This security mode is used when a RADIUS server is connected to the Router. Radius IP Address: P lease input IP address of the radius server here. Radius Port: Please input the port number of the radius server here.
Radius IP Address: Please input IP address of the radius server here. Radius Port: Please input the port number of the radius server here. Shared key: The encryption key that the router is authenticated through RADIUS server Session Timeout: The recertification time interval between the router and the server. The default value is 3600s. 802.1X This security mode is used when a RADIUS server is connected to the Router. 802.
Disable: When the Disable function (in the pull-down menu under the security mode) is selected, the access strategy function is disabled. It stops access control of the wireless devices listed on the MAC list. When the Disable function in the pull-down menu of Policy is selected, you can delete a relevant MAC by clicking on the Del button in the MAC list and then by clicking on the Apply button to submit the order and to restart the router.
Phy Mode: Select the supporting Physical mode (CCK, OFDM, or HTMIX) . The same physical mode must exist for all of the connecting equipment. Encrypt Type: Select NONE (no encryption type). There are 3 types: WEP, TKIP (Temporal Key Integrity Protocol) and AES (Advanced Encryption Standard) . You can set a maximum of four different types and can use these types to connect to four different clients. Note: The same encryption type must exist for all of the equipment to the connection to be established.
WPS (Wi-Fi Protected Setup) WPS is a standard used to establish an easy and secure wireless client and router. It is created by the Wi-Fi Alliance, so you don’t need to choose the encryption type or to set the key. You can set the WPS by inputting the right PIN code or by pressing the WPS/RESET button on the panel. WPS Config: Select the Enable or Disable WPS function. You need to enable the WPS before you can use the WPS button on the panel to set the PBC encryption.
SSID: enter the name of wireless base station. MAC Address (optional): enter the BSSID name which is connected to wireless base station. Security Mode: Select the security mechanism. Encryption Type: Select the wireless encryption type. Pass Phrase: Enter the password for the encrypti on key. Station List You may monitor stations associated with the AP here.
Site Survey When the router works in Ethernet converter mode, scan the base station, the wireless router based near the station can be searched out, there will be a list shows service set identifier base station (SSID), the basic service set identifier (BSSID), received signal strength , channel , encryption type and other information. Select the appropriate base station, then click on "Connect" button, in the popup page you can set the password which associated with online authentication access.
When connection is successful, the service set identifier (SSID) can be shown as an green symbol, a shaking hands on the top. In addition, you also can click on the "Add Profile", in the popup pages you can operate some associated settings, click "Apply" button, and then see the information by clicking the "Profile" .
Advanced When the router works in Ethernet converter mode, through the advanced settings option, you can set the parameters of wireless client mode, the number of wireless channel, B/G/N protection mechanisms and so on. 11n Configurations When the router works in Ethernet converter mode, it acts as a wireless client working in 11n mode, you set some parameters through the "11n Configurations" option.
Firewall MAC/IP/PORT Filtering This function is used to manage the clients connected to the router, so that you can limit the client’s Internet access. Before using this function, you need to choose Accept or Drop so that a data package that does not match the rule will be categorized as Accept or Drop accordingly. Then, fill in the corresponding rules. The rules depend on your needs, not all of the information needs to be filled in. Example: If you want to prohibit a client whose IP address is 192.168.16.
Virtual Server Settings: Enable or Disable the virtual server. (The default is Disabled) IP address: Enter the IP address of the internal network which you want to set up as a virtual server (like 192.168.16.254). Port Range: Server port range of the host in the internal network (like 80). Protocol: Select the program protocol (TCP/UDP/TCP&UDP). (The default is TCP&UDP.) Comment: Enter a comment. Example for the configuration above: “Visit 80 port. It will turn to the host whose IP address is 192.168.16.
System Security Select “Firewall | System Security” to enable or disable the remote management. You can allow or forbid a PC in the WAN network management router by using the WAN IP address of the router to access a web page. You can enable or disable ping packages and ping requests in the WAN filter, port scan block, SYN flood and in the SPI firewall function. Caution: If you enable the SPI firewall function, some firewall functions (like IP/MAC/PORT filtering) may stop working.
Administration Management In the left pane, click on “Administration | Management” to set configurations such as: language, administration account, password, current time, NTP (Network Time Protocol), and DNS server. Select Language: Choose one of three languages and click on the Apply button to complete the language setting. Account: Enter a new user name for the device. (The default is admin) Password: Enter a new password. (The default is admin). Click on the Apply button.
Update Firmware: Click on Browse to choose the latest firmware file for the router. Click on the Apply button to upgrade it. The firmware will upgrade and then the system will reboot. Update Boot-loader: Click on Browse to choose the latest system-loader program file for the router and then click on the Apply button to update it.
Statistics Click on “Administration | Statistics” in the left pane to see the current system memory usage and the number of packets sent and received on the WLAN, LAN and WAN networks . System Log In the left pane, click on “System Log” to display the system login of the router. Query and easily troubleshoot the local system or remote monitoring to know which system has logged into the router. Click on the Clear button to delete the current login record.
Appendix A: Common Troubleshooting Methods Appendix A provides some methods to resolve problems you may meet when you install the router and some steps to take to analyze the problems using diagnostic tools. If you cannot resolve a problem, please contact the Technical Support department. 1.Problem: Power indicator does not light. Solution: Check that the power supply is working and that you are using the proper power adapter. 2.Problem: WAN indicator does not light when a network cable is plugged in.
11.NAT (Network Address Translation) It allows for more than one computer to be in a LAN, sharing an IP address of the public network. It shields LAN users who access the Internet and it plays an important role in ensuring network security. It is usually used by broadband routers. 12.NIC (Network Interface Card) Located in a PC, it provides a physical port to a cable connected to it. If it is an Ethernet NIC, it usually uses an RJ-45 port. 13.
Router W ireless Serioux Ghid de utilizare Vă mulţumim pentru alegerea acestui router wireless broadband. Înainte de utilizarea routerului, vă rugăm să citiţi cu atenţie prezentul ghid de utilizare, acesta conţinând informaţii despre toate setările de bază. Specificaţiile menţionate în ghidul de utilizare fac referire la routerele wireless broadband seria SRX-W R150 şi seria SRXWR300. Imaginile din prezentul manual referitoare la interfaţă furnizează informaţii pentru utilizatori.
Caracteristicile produsului ◆ Reuneşte într-un singur dispozitiv un router, un punct de acces wireless, un switch cu patru porturi şi un firewall. ◆Se conformează standardelor IEEE802.11n, IEEE802.11b şi IEEE802.11g. ◆Tehnologia MIMO utilizează semnalul reflectat pentru a mări de opt ori distanţa de transmisie faţă de standardul iniţial 802.11g şi restrânge zonele fără semnal din aria de acoperire wireless. ◆Asigură rate de transmisie de până la 150/300Mbps.
Indicatoare LED Indicator de alimentare cu energie: ledul se aprinde când dispozitivul este alimentat cu energie. Indicator de stare pentru LAN: ledul se aprinde când conexiunea este stabilită. Ledul clipeşte când sunt transmise sau recepţionate pachete de date. Indicator de stare pentru WAN: ledul se aprinde când conexiunea este stabilită. Ledul clipeşte când sunt transmise sau recepţionate pachete de date. Indicator de stare pentru WLAN: ledul se aprinde la activarea unei funcţii.
Procedura de instalare hardware Stabilirea conexiunii WAN Conectaţi portul W AN al routerului la modemul xDSL cu ajutorul unui cablu. Stabilirea conexiunii LAN Conectaţi portul routerului la switch cu ajutorul unui cablu. De asemenea, puteţi conecta direct placa de reţea a computerului. Conectare la sursa de curent Conectaţi la sursa de alimentare cu energie şi routerul va porni automat.
Sfaturi: Selectaţi “Obtain an IP address automatically” numai atunci când serverul DHCP al routerului este activ. De asemenea, puteţi seta dumneavoastră adresa IP. Cu toate acestea, adresa IP a computerului şi cea a routerului trebuie setate în aceeaşi subreţea şi nu poate fi alocată aceeaşi adresă IP. Adresa IP implicită este 192.168.16.1, iar masca de subreţea este 255.255.255.0, deci adresa IP nu trebuie să fie 192.168.16.1. 3.
7. Faceţi click pe butonul OK. Dacă numele de utilizator şi parola sunt corecte, va fi afişat un ecran de configurare W EB. 8. V-aţi conectat cu succes la pagina de setări. Asistentul de configurare Routerul dispune de diverse funcţii şi include un asistent de configurare. Asistentul de configurare vă îndrumă în vederea finalizării setărilor de bază, chiar dacă nu sunteţi familiarizaţi cu routerul. 1.
Moduri de funcţionare Routerele wireless din seria SRX-W R150 sau SRX-W R300 sunt routere puternice, deoarece pot suporta patru moduri de funcționare: mod Bridge, mod Gateway, mod Ethernet Converter şi mod AP Client (modul implicit este Gateway) Modul Bridge: Toate interfeţele Ethernet şi wireless sunt interconectate într-o singură interfaţă.
Modul AP Client: Interfaţa wireless este tratată ca port WAN, iar interfaţa wireless AP şi porturile Ethernet sunt porturi LAN. Configurare WAN Acest router suportă mai multe tipuri obişnuite de conexiuni WAN. Selectaţi metoda de conectare utilizată de operatorul de reţea şi selectaţi informaţiile corecte privind parametrii (comunicate de către furnizorul de servicii Internet ). După această etapă, puteţi partaja Internetul în mod normal.
2. Conexiune Static IP (IP fix) Dacă furnizorul de servicii Internet utilizează tipul de conexiune Static IP, vă rugăm să selectaţi Static (fixed IP) pentru configurarea parametrilor reţelei. Dacă aveţi nelămuriri cu privire la tipul de conexiune, vă rugăm să contactaţi furnizorul de servicii Internet. IP Address: Introduceţi adresa IP comunicată de furnizorul de servicii Internet. Subnet Mask: Introduceţi masca de subreţea. Gateway: Introduceţi adresa gateway WAN.
4. Conexiune L2TP Server IP: Introduceţi adresa IP a serverului (obligatoriu) comunicată de către furnizorul de servicii Internet. User Name: Introduceţi numele de utilizator L2TP (obligatoriu) comunicat de către furnizorul de servicii Internet. Password: Introduceţi parola L2TP (obligatoriu) comunicată de către furnizorul de servicii Internet. Address Mode: Obţineţi o adresă IP: Dynamic: Selectaţi acest mod dacă routerul poate obţine o adresă IP în mod automat.
Configurare LAN Selectaţi “Internet Settings | LAN” pentru a seta parametrii porturilor LAN (adresa IP, masca de subreţea, DHCP etc.). Hostname: Denumirea reţelei la care se conectează routerul. IP Address: Adresa IP LAN a routerului. (Adresa implicită este 192.168.16.1). Subnet Mask: Masca de subreţea a routerului, în funcţie de starea reţelei. (Adresa implicită este 255.255.255.0.) LAN2: Activaţi sau dezactivaţi adresa celui de al doilea port LAN, conform solicitării.
Rutare avansată Această funcţie reprezintă o opţiune pentru adăugarea unei rutări specifice unei anumite gazde, dacă este cazul. Utilizarea corespunzătoare a routerelor statice în cadrul unei reţele poate reduce problemele de selectare a rutării şi supraîncărcarea cu date a fluxurilor de rutare, aceasta putând mări viteza de transmitere a pachetelor de date. Prin setarea adreselor IP pentru masca de reţea şi gateway poate fi organizat un tabel de rutare.
Setări wireless Radio On/Off: Radio pornit/oprit. Network Mode: Selectaţi unul dintre cele patru moduri de funcţionare a routerului: 802.11b, 802.11g, 802.11b/g şi 802.11b/g/n. Network Name (SSID):Denumirea de reţea (cel mult 32 caractere) a semnalelor wireless setată pentru distingerea unei reţele individuale. Broadcast Network Name (SSID): Activaţi sau dezactivaţi funcţia de difuzare SSID. Selectaţi disable. SSID este ascuns astfel încât un client wireless nu va putea scana echipamentul SSID.
Anexa A: Metode generale de soluţionare a problemelor Anexa A prezintă câteva metode de soluţionare a problemelor pe care le puteţi întâlni când instalaţi routerul broadband seria W A02-03 şi seria WP02-03, precum şi câteva măsuri necesare în vederea analizării problemelor prin intermediul instrumentelor de diagnosticare. În cazul în care nu puteţi soluţiona o problemă, vă rugăm să contactaţi serviciul de Asistenţă Tehnică. 1. Problemă: Indicatorul de alimentare cu energie nu se aprinde.
Безжичен рутер Serioux Благодарим Ви, че закупихте рутера Serioux. Прочетете ръководството преди употреба. Продукта се намира в три версии: с вградена антена N150, в външна антена N150 и с 2 антени N300 .
Характеристики ◆ Интегрира рутер, безжична точка за достъп, четири-портов суич и защитна стена (firewall) в едно устройство. ◆ Отговаря на стандартите: IEEE802.11n, IEEE802.11b и IEEE802.11g ◆ Технологията MIMO увеличава до 8 пъти разстоянието на предаване на сигнала спрямо стандартният 802.11g и намалява „мътртвите точки“ на безжичното покритие. ◆ Осигурява 150/300Mbps скорост на предаване. ◆ Поддържа W MM, което увеличава качеството на аудио-видеото.
LED индика тори Инд икат ор м ощ ност : LED-а ще свети, когато устройството е включено. Стат ус инд икат ор з а LAN: LED-а ще свети, когато е установена връзка. LED-а щ е при мигв а, когат о д анните са бил и пред ад ени ил и приет и. Стат ус инд икат ор з а W AN: LED-а ще св ет и когат о е установ ена в ръз ка. LED-а ще примигва, когато се предават данни. Стат ус инд икат ор з а W LAN: LE D-а ще свети когато някоя функция е активна. LED-а ще се изключва, когато безжичната функция е недостъпна.
Управление и свързване Преди първата употреба на рутера, следвайте инструкциите (пример с“Windows XP): 1. Проверете в “Network Connections”, дали компютъра има вградена мрежова карта. 2. Настройте вашият IP address през“Internet Protocol (TCP/IP)”. Обикновено, DHCP сървъра на рутера е включен, така че изберете “Obtain an IP address automatically” и „Оbtain server address automaticall y”, под основният т Съвети: Изберете “Obtain an IP address automatically” само когато сървъра DHCP на рутера е активен.
5. Влезте в интерфейса на рутера отваряйки един уеб браузърr. В ъв едет е ht t p: // 1 9 2. 1 68 . 1 6. 1 (IP ад реса на рут ера) и нат иснет е E nter. 6. Ще се появи един прозорец за вписване, въведете user name/password 7. Кликнете на бутона ОК. Ако потребителя и паролата са били правилни, ще се свържете. 8. Вече сте влезли в страницата за настройки.
Wizard Мож ет е да из берет е бързо конф игуриране с Wizard, д ори и д а не сте з апоз нат с рут ера. 1. Кл икнет е на „W izard” в левия край и кликнете на „N ext“ в десния край “Qui ck settin g”. Т ака щ е з апочне процед урат а по наст ройкат а на рут ера . 2. Това устройство поддържа всичките пет често използвани начина за свързване към мрежата. Режима по подразбиране е предварително избран. Изберете желаният вариант. Натиснете Next. 3. Мож ет е д а настроит е им ето на м реж ата и т ипа парол а .
Режим на рабо та Р ут ерит е SRX-WR150/300 подд ърж ат 4 реж им а: B ri dge m ode, Gatewa y m ode, Ethernet converter mode и AP кл иент (режим а по подраз биране е Gateway). Р еж има на работ а е настроен на B ri dge mode. Всички порт ов е E thernet и wi rel ess-а са събрани на ед но. Работ и кат о ед ин суич, кат о връз ката wireless и firewall са дезактивирани. Наст ройка реж им Gatewa y: Gatewa y е режим по подразбиране. Жълтият E thernet порт е з а W AN port.
Интерне т нас тройки WAN Този рутър поддържа няколко т ипа WAN връзки. Изберете връзката в зависимост от интернет доставчика ви. Ако използвате динамична връзка, di al -up връзка, PPPoE di al -up връзка, etc., има два начина да проверите дали връзката ще работи. Единият начин е да заредите директно една страница, а другият е да се разграничи според състоянието на интернет конфигурацията. Ус пешна връзка Някои интернет доставчици могат да искат блокиране на МАС адреса. 1.
2. Р еж им на връз ка 2: Static (Fi xed IP ) Ако в аш ият д ост ав чик използва S tatic IP m ode, м ол я изберете Static (fi xed IP), за да настроите параметрите на мрежата. Ако не сте сигурни за режима, свържете се с вашият IP Addr ess: В ъв ед ет е ст ат ичният IP адрес даден ви от интернет доставчика. Subnet Mask: Във ед ете subnet m ask . Gatewa y: В ъв ед ет е адреса W AN gateway. Prim ar y DNS Ser ver: В ъв ед ет е гл ав ният DNS server address д ад ен от инт ернет доставчика.
Server IP: Въведете IP адреса на сървъра даден ви от интернет доставчика и потребителското име L2TP User Name. Password: Въведете парола L2TP, дадена ви от доставчика. Address Mode: Получаване на IP address: Dynamic: Изберете този режим ако рутера може да открие автоматично IP адреса. Static: Изберете този режим ако доставчика ви е дал статичен IP адрес. IP Address: Изберете “Static”и въведете L2TP IP адреса. Subnet Mask: Въведете Subnet Mask .
