Operation Manual

320 Color, Fills, and Transparency
3. Click the Fill or Line, or Text button at the top of
the tab to determine where color will be applied. The color of the
underline reflects the color of your selected object. For selected frame
text, the Fill will be the background text color (but not the frame's
background color).
4. Select a color from the color spectrum or sliders depending on color
mode selected.
Why not use the Color Picker tool to define the color?. After
choosing the tool, click anywhere in the workspace to "pick up" the
color under the cursor.
In RGB color mode, you can use hexadecimal color coding by
selection from the Color tab's Tab Menu button.
To apply a solid color via the Swatches tab:
1. Select the object(s) or highlight a range of text.
2. Click the Swatches tab.
3. Click the
Fill or Line, or Text button at the top of
the tab to determine where color will be applied.
4.
Select a color swatch from the Site Palette (commonly
used colors and those previously applied in your site) or standard
Palette (standard RGB or themed palette presets such as WebSafe
colors).
Alternatively, use Format>Fill... to apply color via a dialog.
To change a solid color's shade/tint (lightness):
1. Select the object and set the correct Fill, Line or Text button in the
Color tab.
2. From the Color mode drop-down menu, select Tinting.