Operation Manual

Arranging Object 249
Once attached, the object shows an Attach to
Text button under the object. Click to edit properties.
The
Attach Point is a set location in the artistic
text or frame text from which the object is positioned
from. Drag to a different position in the text to move
the attach point and object simultaneously.
Or, for an inline object:
1. Enable Position inline as character.
2. To set the object's vertical alignment with respect to adjacent
text, select an Align with text option. Text will not flow around
the attached object.
3. (Optional) Enter a Offset by value to set the percentage to which
the object will be vertically offset in relation to its height.
4. (Optional) Check Scale to to scale the object to a percentage of
the adjacent text point size. This keeps the same relative size if
the text size changes. Once positioned, you can specify the
Distance from text: the "standoff" between the object's outline
and adjacent text.
4. (Optional) Check Use these settings when pasting to update floating
and inline defaults. Any subsequent object pasting will adopt the
settings saved when the option was checked.
5. Click OK. The object appears inline with text, and shows an
Attach to Text icon.
Objects inserted into text frames use "Float with text" default settings.
To view attached object properties:
1. Select an attached object.
2. Click Attach to Text shown under the object.