Operation Manual

78 | Working with Text
When frames are created by the AutoFlow option when importing
text, they are automatically linked in sequence.
To create a link or reorder the links between existing frames, you can use the
Link button or the controls on the Frame context toolbar. Remember to watch
the cursor, which changes to indicate these operations...
To link the selected frame to another frame as the next frame:
• Click the frame's Link button.
OR
Select the frame, then click the
Link Frame button on the Frame
context toolbar.
• Click with the Textflow cursor on the frame to be linked to. Only empty
frames are valid frames to link to.
To unlink the selected frame from the sequence:
• Click the Unlink Frame button on the Frame context toolbar.
OR
Click on the frame's Link button, then click with the Textflow cursor on
the same frame.
Story text remains with the "old" frames. For example, if you detach the
second frame of a three-frame sequence, the story text remains in the first and
third frames, which are now linked into a two-frame story. The detached
frame is always empty.
If you click on a frame's Link button, and then change your mind
about linking or unlinking, press the Esc key or click on a blank area of
the page or pasteboard to cancel.
To navigate from frame to frame:
• Click the Previous Frame or Next Frame button on the Frame
context toolbar.