User Manual

Image Adjustments and Effects 61
To apply an adjustment (using custom settings):
1. Review the available adjustments in the Filters section, before
expanding the adjustment you want to apply by clicking Expand
filter.
2. Modify the adjustment using sliders, check boxes, graph adjustments,
and drop-down menus (you can also enter absolute values into
available input boxes). The image will be adjusted automatically to
reflect the new settings in the preview window.
You'll notice the adjustment filter is enabled once a setting is changed,
i.e. the Enable/disable filter option becomes grayed out ( ).
3. Click OK. A filter layer is created (as above).
To reset (and disable) a modified adjustment:
• Click Reset settings in the top-right corner of the adjustment's
pane.
To edit PhotoFix adjustments:
• Double-click the layer with the PhotoFix adjustments applied.
PhotoFix is launched with the previously set adjustments still applied.