Operation Manual

90 Pictures
To preview, fine tune, and apply a filter:
1. Click a filter thumbnail.
2. As soon as a filter is selected it is temporarily added to Trial Zone
which lets you experiment freely with your own settings for that
filter; the picture automatically refreshes to preview your new
settings.
3. Adjust sliders (or enter input values) until your filter suits your
requirements. Some filters offer check boxes, drop-down lists, and
additional controls (e.g., Advanced settings).
Selecting a new filter always replaces the current filter.
To commit your filter:
• Click
Commit to accept your changes. This adds the filter to the
right-most Filters stack where additional filters can be added and
built up by using the same method.
Adjustments are applied such that the most recently added filter always
appears at the bottom of the list and is applied to the picture last (after
the other filters above it).