Datasheet

Using Brushes 89
To adjust brush width or opacity with pressure:
1. Select a previously drawn brush.
2. In the Pressure tab, pick a pressure profile from the drop-down menu.
3. Enter a
Width or Opacity value by setting a percentage value
in the input box, using the slider or using the up/down arrows. The
lower the value the less the pressure effects the brush width or opacity,
i.e. a value of 50% will apply half the brush width or opacity under
pressure.
You can set the pressure variance, i.e. the degree to which you apply brush
pressure, via the Pressure tab by increasing/decreasing the lower or upper limits
of the pressure chart. (See online Help for more information).