Operation Manual

100 Fills, Lines, Colours, and Transparency
Changing line width
On a selected line, curve, or
shape (opposite), drag the
Width slider in the Line
tab. To turn off the line, set
the box to 0pt.
If you want to set
the line width to
that of a hairline
size, see below!
Hairline widths
Use Hairlines when you need to output the thinnest possible line width
for special printing cases, such as when producing artwork for laser
cutting. The hairline width for vector output is configurable.
To set a hairline width on your line:
• On the Line tab, set the Width box to ‘Hairline’. Your hairline
shows as a 1 pixel-wide line.
To set a line width for vector output:
1. From Tools>Options, select Drawing Quality>Hairline Options.
2. Set the Hairline width on vector device value, choosing to always
express the value in inches with the supporting check box.