Operation Manual

Getting Started 23
6. (Optional) Set your colour mode to either RGB or CMYK (below)
from the Primary Colour Mode section. CMYK is used for
professional printing. For more details, see Working in RGB or CMYK
colour mode below.
7. Click OK. The new document opens.
To start a new drawing during your DrawPlus session:
• Click New Drawing on the Standard toolbar (if Startup Wizard
is disabled).
- or -
Choose New>New Drawing from the File menu.
You'll get a new drawing in a new window each time you choose this method—
the most recent page size and orientation chosen previously is used.
You can always adjust the page settings later via File>Page
Setup....
To start with a new keyframe or stopframe animation, see Getting
started with animation on p. 225.
Use Import PDF from the Startup Wizard to unlock the contents of
third-party PDF drawings.
Working in RGB or CMYK colour mode
Whichever document type you choose, you'll be able to begin your design in
either RGB or CMYK colour modes. The former is suitable when creating
graphics for the web; the latter is ideal for professional pre-press PDF or image
output (see p. 262 or p. 263, respectively). At any point in the future, you can
change from RGB to CMYK, or CMYK to RGB modes easily.