Operation Manual

Working with Pictures 183
3. (Optional) Adjust the sliders at the right of the workspace (each
unique to the profile used); your profile settings will be modified. If
you want to save these modified settings you must save the changed
profile to a new custom name.
4. Click Trace to trace your logo, photo, or other bitmapped
artwork. It's best to keep clicking this button to update your main
window after any adjustment. If you want to abort the autotracing
process, you can click the Cancel button on the progress bar.
5. (Optional) For fine-tuning your traced output, several options are
possible:
• Click Adjust to access Merge, Fill, and Node tools for fine-
tuning your vector output.
• For removing colours in traced logo output, right-click on the
palette colour you want to remove.
You can add a new colour or replace an existing colour by left-
clicking on an empty or occupied colour swatch and dragging the
Colour Selector to any colour on your computer screen.
Remember to click Trace to refresh the view.
6. When you're happy with your traced output, click Accept to add
it to the page.
All slider settings are described in full in the Help pane which
accompanies the AutoTrace studio. Also covered are procedures for
tracing greyscale and colour photos.