Owner's Manual

10
o Attach both rack supports to
forks, making sure the rack
support arm is routed between
the fork and the brake line and
tighten to 6.5 Nm using torque
tool
6. Install front wheel
o Remove front axle
o Remove plastic spacer from
brake caliper. Avoid applying
brakes without a wheel installed
o Fold down front end of lower box
tray
o Fit brake rotor into caliper
o Align and insert axle through fork
and wheel
o Tighten to 11 Nm using torque
tool
7. Remove any remaining ties between
eBicycle and packaging
EN