Owner's Manual

14
o Screw the pieces together,
tightening using multi-tool
Torque Specifications
Always tighten fasteners to the correct
torque to ensure the integrity of the
eBicycle. In case of a conflict between this
manual and information provided by a
component manufacturer, consult with
Serial 1 or the component’s customer
service representatives for clarification.
Table 3: Torque Values
Part
Tool
Size
Torque Notes
Handlebar
4mm
⬡
6 Nm
Tighten
bottom two,
then top two screws
Handlebar
stem
4mm
⬡
6 Nm
If necessary, for
service
Saddle rail
clamp
5mm
⬡
9 Nm
If necessary, for
service
Seatpost
clamp
4mm
⬡
6 Nm
Set the
height, then
torque
Axles
(wheels)
6mm
⬡
11 Nm
Align brake disc
rotor between brake
pads before
inserting axle
FIT
Verify your eBicycle is the correct size.
Correct fit is essential for a safe and
pleasant ride.
Standover Height
Standover height is the basic element of
eBicycle fit. It is the distance from the
ground to the middle of the top tube.
Step-Over Frame
When straddling the top tube of a Step-
Over style bike, you should have 1 – 2 in
[2.5 – 5 cm] of clearance between yourself
and the bike.
Step-Thru Frame
Standover height does not apply to
eBicycles with step-thru frames. Instead,
the limiting dimension is determined by
saddle height range.
EN