Specifications

33
DESIGN AND INSTALLATION DETAILS
• Specify the lines be nitrogen purged while being
brazed to help avoid scaling inside the pipe
• All the refrigeration requirement disappear with a
Protocol or dry cooler system!
Control Wiring
The NE Series dehumidifiers have all necessary sensors
unit mounted and set points pre-programmed at the
factory. Remote duct heaters, outdoor air-cooled
condensers, auxiliary pool water heaters and remote
exhaust fans all require interfacing with the dehumidifier.
The microprocessor has been programmed to
control their operation. An Ethernet connection to the
Internet allows all functions to be monitored by trained
professionals with Seresco’s WebSentry. It is the final step
to ensure the facility operates trouble free.
Unit mounted sensors, all accessible via the
Internet include:
• Refrigerant high pressure
• Refrigerant low pressure
• Return air temperature
• Return air relative humidity
• Pool water temperature (in and out)
• Outdoor air temperature
• Supply air temperature
• Evaporator air temperature
• Compressor superheat temperature
• Superheat
• Airflow
Figure 23 – Control Wiring