Specifications

28
Natatorium DesigN maNual
In order to ensure the system performs reliably and
that the equipment is suitable for an indoor pool
environment, there are several items to look for in a
quality product. The materials and components used
must have adequate corrosion protection. Seresco
uses only the best available materials, coatings and
paints to ensure the longest possible unit lifespan.
For example, the sheet metal used has an automotive
grade galvanizing that is intended to withstand road
salt. This already corrosion resistant sheet metal is then
given a mill applied zinc phosphate primer followed by
anexterior grade siliconemodifiedpolyester top coat.
Service Vestibule
The best way to protect a component from corrosion is
to keep it away from the chlorine. All vital components
in a Seresco unit are located out of process airstream,
housed in a protective service vestibule. These key
components include compressors, receivers, pool water
heaters, contactors, control valves and electronics.
Components in the airstream are kept to an absolute
minimum, ensuring very few opportunities for corrosion.
There is an added benefit to using a service vestibule –
100% of the evaporator’s sensible cooling is delivered
to the space for cooling. Systems with compressors,
receivers and pool water heaters in the process air
stream add so much heat that their unit cooling output
needs to be de-rated by as much as 25%!
Microprocessor Control
The dehumidification system controls the entire
Natatorium environment. There are many aspects to
this control, and feedback regarding system
operation is vital to the building operator. Seresco’s
CommandCenter
®
microprocessor controller has full
range of unit mounted sensors, pressure transducers
and remote sensors that can all be accessed from the
Keypad, building management system interface or over
the internet using Seresco’s WebSentry web browser.
All necessary information regarding the conditions in the
space and system operation are always at the fingertips
of the operator.
WebSentry
®
Technology for
Ultimate Peace of Mind
WebSentry redefines the concept of factory service and
support by remotely monitoring, analyzing and reporting
all the critical functions of the dehumidifier 24/7 – in
real time via the Internet. With WebSentry all necessary
information regarding unit operation can be viewed from
any web-enabled device. Setpoints can be adjusted,
sensors can be recalibrated, and unit performance can
be monitored. Simply run a Cat 5 ethernet cable to the
unit and plug it in.
There is also a Smartphone application for WebSentry
®
and the CommandCenter
®
is WiFi enabled!
Units connected to WebSentry from start up get a
premium one-year labor warranty in addition to a two-
year parts warranty.
Alarm at the unit? It’ll email you! Unit alarms will
generate e-mails to any email address that you add to
the contact list! Installing contractors and contractors
trying to secure service contracts can be set up to
access their units. The facility owner, especially those
in remote locations will have a much more affordable
means of ensuring their units are monitored and service
is supervised over the internet by factory technicians.
Dehumidifier Specifications