Specifications

35
Outdoor Air cooled condenser or
Dry Cooler location:
 ……. ft [above / below] Seresco unit
 If above, oil traps installed: [yes / no]
 Same Level as Seresco Unit
 Condenser/Dry Cooler Model
installed:………………………….
 Total line length to OACC or
Dry Cooler………………………….
 Hot gas line size……………….…..
 Liquid line size……………………..
 Total lbs R-22 added………………
 Pipe size to Dry Cooler……………
Water Cooled and Dry Cooler AC
 Fluid GPM………………………..
 Glycol %:…………………………
 Glycol stabilizers added: [yes / no]
 Piping and valves installed per Specs?
 Water/fluid temperatures:
Entering Seresco unit:……………..
Exiting Seresco unit:……………….
Operational Data
Controller Programming
Dehum. A C
Water Heat
& A C
Water
heat &
Dehum
Sensor Setpoint
Return Air (°F)
Space temperature
Supply Air (°F)
Space relative
humidity
Return Air %RH
Water temperature
Entering Water (°F)
Leaving Water (°F)
Water – GPM
Air off evaporator (°F)
Outdoor Air
Suction - PSIG
CFM
High - PSIG
DB/WB
Compressor Discharge
Temp (°F)
Intake minimum 6’
from an exhaust
outlet?
Sight Glass Clear?
Preheated prior to
entering unit?
Receiver sight glass
ball floating?
Top/Bottom
Heat recovery
device used?
Comments:…………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
………………………………………………………………………………………………
Technician……..………………………………. Company:……………………………….
Telephone Number:……………………………. Date:…………………………………….