Specifications

34
6.11 Start Up and Warranty Registration Form
Project Name __________________________
Location _______________________________
Jobsite telephone number ________________
Seresco Representative _________________
NE Series Model _____________________
Serial Number _______________________
Compressor Serial # __________________
Voltage on site _______________________
Electrical Data L1 – L2 L2 – L3 L1 – L3 Nameplate
Compressor Amperage
Compressor Voltage
Blower Amperage
Blower Voltage
Installation Review and Checklist
 Supply air blowing
on exterior doors
and windows?

No supply-return
air short-
circuiting?

Outdoor air
connected to
Seresco unit?

Exhaust fan
installed and
operating?

Vapor Barrier
installed?

Adequate service
access provided?

Units level and
vibration isolated?

Flex-Connectors
used at both unit
duct connections?
 Condensate P-
Trap installed and
filled?

Condensate line
tested?

Pool Water piping
properly installed?

Pool water
circulating pump
operating?

Auxiliary
circulating pump
installed?

Pool water flow
per specifications?

Floor Drain in
mechanical room?

Chemicals stored
in separate
ventilated room?
 Outdoor air cooled
condenser or Dry
Cooler properly
installed?

Unit nameplate
voltage verified?

Main disconnect
installed?
 Wiring connections
checked & tightened?

Control wiring to
outdoor condenser or
Dry Cooler installed?

Control wiring to
auxiliary pool water
heater installed?

Ethernet cable
connected to unit.

Blower rotation
correct?

Air balance report on
file?