User`s manual

• Multiple Recording Mode. (Schedule, Pre-Event, Text-In and Event Recording)

• Multiple Search Engines. (Date/Time, Calendar, Event, Text-In, Bookmark)

• Daylight savings time change function.

• Alarm handling with history log and Pre-alarm recording.

• Network Time Synchronization.

• Self-diagnostics with automatic notification including hard disk drive S.M.A.R.T. protocol

• Live or Recorded Video Access via Ethernet.

• Built-in web client. (Live, Search & Playback)

• User authentication, 3 user levels and User level – Camera partitioning setup for user

management of up to 32 user registrations

• Built-in network interface (10Base-T / 100Base-TX / 1000Base-T) for recording and client access.

• IP routing function for direct camera setup via client access.

• Up to 2 HDDs can be installed in the 1U rack type. (8.89 cm (3.5 inch) Serial ATA HDD)

• Four USB 2.0 Ports

• Supports ONVIF cameras.

This is a global interface standard that makes it easier for end users, integrators, consultants,

and manufacturers to take advantage of the possibilities offered by network video technology.

ONVIF enables interoperability between different vendor products, increased flexibility, reduced

cost, and future-proof systems.

1.3 Overview

• Front View (1U Rack type)

NO Function Description

1 Key Lock

Turning the key completely engages the lock, so the HDD bay

door cannot be opened.

2 SATA Bracket

Mounts hard disks for storing recorded video. Up to four hard

disks can be mounted. Mounted HDDs are referred to as

Internal HDD1 (left) and Internal HDD2 (right.)

3 Factory Default Button Executes the factory default.

4 HDD LED

A flashing green means that internal HDDs are installed and

functioning normally.

5 Power LED Steady red for power on.