User`s manual

7
1. Description
This manual applies to the NVR16 network video recorder.
The NVR16 network video recorder supports up to 16 network cameras. It can record more than 100
hours of high quality Full HD images onto its maximum capacity of hard disk drives.
The NVR16 is extremely straightforward to install and setup, as it detects network cameras and
defines the parameters of each through a dedicated configuration wizard. You can start monitoring
instantly, as the images are automatically assigned to a layout menu.
The Network Camera is fully featured for security surveillance and remote monitoring needs. It is
based on an embedded linux and high performance, and makes it available on the network as real-
time, full frame rate Motion JPEG and H.264 (or MPEG-4) video streams.
The alarm input and alarm output can be used to connect various third party devices, such as, door
sensors and alarm bells.
1.1 Components
The system comes with the following components:
y Network Video Recorder unit
y Power Cord
y SATA Hard Disk Drive
y Key and Rack-mount Kit
y Installation CD including ATVision IP Software and User’s Manual
y Installation Guide
Note: Check your package to make sure that you received the complete system, including all
components shown above.
1.2 Key Features
Your network video recorder (NVR) provides recording capabilities up to 16 camera inputs. It provides
exceptional picture quality in both live and playback modes, and offers the following features:
• Up to 16 network cameras can be connected and recorded.
• H.264, MPEG-4 and JPEG multi format.
• Quick setup by automatic camera detection and simple setup
wizard without the use of PC.
• Supports HD network camera input.
• Continuous Recording with the overwrite Mode.