User`s manual

The description of each field follows.

y Connect Site: Connects all cameras currently registered.

y Connect Channel: Connects a channel selected.

y Disconnect Site: Disconnects all cameras currently connected.

y Disconnect Channel: Disconnects a channel selected.

y NVR Setup: Set the configuration of NVR.

y NVR Wizard: Display the pop-up window for Wizard setup.

y Open Camera Web Page: Display Web page of the network camera selected.

Note: The NVR allows you to access directly in your PC the network camera connected to the local

network of the NVR because it has routing function.

Select “Connect Site” in the pop-up menu and check whether the client s/w displays camera videos on

the screen. If you can’t see camera videos, check the camera information in the Camera Registration

menu.