User`s manual

48
3) Service
• Host Name Configuration
- Host Name – enter the host name to be used as device information in the client software or
SmartManager.
• Services
- HTTP port: Enter a port to receive a service through the HTTP. Default Port Number is
‘80’.
• Web port range
The NVR acts as the port forwarding device like a router when you access network cameras
connected on a camera (LAN) port of the NVR from the other (WAN) side through a client port of
the NVR.
- Start port: Enter a starting port number to be mapped as router. Default Port Number is
‘50000’.
- End port: Displays an ending port number for the router in the field provided.
• ARP/Ping Setting
- Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping
method, which associates the unit's MAC address with an IP address. Check this box to
enable the service.
Leave disabled to prevent unintentional resetting of the IP address.