User`s manual

45
5) Text-In
You can configure settings for the text-in event.
Set the On/Off, Dwell Time, Type, Action, Recording. Click each column in the list to configure settings.
• Text-In Event
-. On/Off: Choose an item from the drop-down list. When an item is On, the text-in event is
activated.
-. Dwell Time: Set the dwell time an event lasts for the specified dwell time from the point of
detection of a text-in event.
-. Type: Set the type and additional configuration such as port, baudrate, protocol and so on of
text-in device.
-. Action: Set the actions the NVR will take whenever it senses a text-in event. Select items in
the pop-up Action screen.
-. Recording: Select the cameras that you want the NVR to record whenever it detects a text-in
event. Select items in the pop-up Recording screen.
• Port Setup
-. Port: Select from RS-232, USB-Serial(1~16) and Lan(1~16).
-. Serial Port Setup: If RS-232 or USB-Serial is selected, set baud rate, data bit, stop bit and
parity depending on text-in device.
-. Network Port Setup: If Lan is selected, set the network port depending on text-in device.
-. Protocol Setup: Currently only generic text device is supported. Set the other configurations
depending on text-in device.