User`s manual

44
4) System
You can configure settings for the system event. The Disk Temperature and S.M.A.R.T. in the System
Event are supported.
• Disk Temperature Event
-. On/Off: Choose an item from the drop-down list. When an item is On, the event for disk
temperature event is activated.
-. Dwell Time: Set the dwell time an event lasts for the specified dwell time from the point of
detection of a disk temperature event.
-. Type: Choose the type of temperature you wish to use from the drop-down list. Select either
ºC (Celsius) or ºF (Fahrenheit).
-. Limit: Choose the limit of temperature you wish to use from the drop-down list. You can set
the Disk Temperature, and the NVR will trigger an alert whenever it exceeds the defined
threshold temperature.
-. Action: Set the actions the NVR will take whenever it senses a video loss. Select items in the
pop-up Action screen.
• Disk S.M.A.R.T Event
-. On/Off: Choose an item from the drop-down list. When an item is On, the event for S.M.A.R.T
event is activated.
-. Dwell Time: Set the dwell time an event lasts for the specified dwell time from the point of
detection of S.M.A.R.T event.
-. Action: Set the actions the NVR will take whenever it senses S.M.A.R.T event. Select items in
the pop-up Action screen.
Note: The Disk Temperature and S.M.A.R.T. status is monitored in real-time. Temperature and
S.M.A.R.T. information will be available only for hard disk drives supporting the SMART (Self-
Monitoring Analysis and Reporting Technology) monitoring program.