User`s manual

42
• NVR Alarm Event
The NVR have 2 input and 2 output alarm ports for itself.
-. On/Off: Choose an item from the drop-down list. When an item is On, the event for alarm
input is activated.
-. Dwell Time: Set the dwell time an event lasts for the specified dwell time from the point of
detection of an alarm input.
-. Type: Choose the type of alarm you wish to use from the drop-down list.
-. Action: Set the actions the NVR will take whenever it senses an alarm input. Select items in
the pop-up Action screen.
-. Recording: Select the cameras that you want the NVR to record whenever it detects an alarm
input. Select items in the pop-up Recording screen.
2) Motion
You can configure settings for the motion event.