User`s manual

41
3.1.4 Event
This menu allows setting event options such as Alarm-In, Motion, Video Loss, System Event, and Log.
The NVR starts recording with settings configured here when an event occurs. The types of event
include External Alarm, Motion Detection, Video Loss, and System Event. An occurred event can
be notified by Alarm Output (2 Channel), and Email.
1) Alarm
You can configure settings for the alarm input from network cameras, or from the NVR.
Set the On/Off, Dwell Time, Action, Recording. Click each column in the list to configure settings.
• Camera Alarm Event
-. On/Off: Choose an item from the drop-down list. When an item is On, the event for alarm
input is activated.
-. Dwell Time: Set the dwell time an event lasts for the specified dwell time from the point of
detection of an alarm input.
-. Action: Set the actions the NVR will take whenever it senses an alarm input. Select items in
the pop-up Action screen.
* E-mail: Select email addresses you want to send via email that an event has occurred.
* HTTP: The NVR sends notification messages to an HTTP server that listens for these.
The destination server must first be configured on the Network page for a proper operation.
* Alarm: The NVR can control external equipment connected to its alarm output port.
-. Recording: Select the cameras that you want the NVR to record whenever it detects an alarm
input. Select items in the pop-up Recording screen.