User`s manual

-. Synchronize with NTP server:

Synchronize the date and time of the NVR automatically with an NTP (Network Time Protocol)

server. Enter the IP address or the domain name of the NTP server, for example, time.nist.gov

or time.windows.com.

-. Set manually:

This option allows you to manually set the time and date.

4) Internet

The NVR supports two LAN ports, so you can use one LAN port for the client monitoring through

internet. To use these features, make sure both LAN ports are connected to the network.

Setting in regard to network can be executed

• Obtain IP address via DHCP

Dynamic Host Configuration Protocol (DHCP) is a protocol that lets network administrators

centrally manage and automate the assignment of IP addresses on a network. DHCP is enabled by

default. Although a DHCP server is mostly used to set an IP address dynamically, it is also possible

to use it to set a static, known IP address for a particular MAC address.

• Use the following IP address

To use a static IP address for the Network Camera, check the radio button and then make the

following settings:

-. IP address:

Specify a unique IP address for your Network Camera.

-. Subnet mask:

Specify the mask for the subnet the Network Camera is located on.