User`s manual

When you click the Format button, the NVR ask you to set the storage to record or archive device.

If the storage is formatted to archiving device, it can be used as a record storage.

Note: Archive records a video to the record storage and

copies it to the archive storage at the same time. The

external USB HDD can be set to backup device only.

Please refer to “5.2 Comprehension about Archive and

BACKUP function” for more information.

The current temperature of the hard disk will be displayed in the Temperature column. The

Temperature column displays Good if the temperature is below the limit and Bad if the

temperature is above the limit.

If the hard disk installed in the NVR supports S.M.A.R.T. (Self-Monitoring Analysis and

Reporting Technology) monitoring program, the status of the installed IDE hard disk is

displayed. The current status of the Disk S.M.A.R.T. will be displayed in the S.M.A.R.T column.

The S.M.A.R.T field displays Good if the Disk S.M.A.R.T. is good and Bad if it is bad.

The Disk Temperature and S.M.A.R.T. status is monitored in real-time.

Click the Finish button to exit Setup Wizard window. If you finish Setup Wizard step successfully,

the NVR displays a live screen and starts recording automatically.

Note: In case that you don’t use Easy Installation function, you must register and configure IP

cameras manually for proper operation.