SLPAC10 Portable Air Conditioner Fan and Dehumidifier
CONTENT Important Safety Tips Precautions...........................................................................................................................3 Product Introduction Main Parts and Components..........................................................................................4 Control Panel and Remote Controller.........................................................................6 Product Operation Placement and Installation....................................................
Important Safety Tips Precautions Please read the Manual carefully before operating the machine: • This machine is for household use only. • This machine is for indoor use only. Please place it in dry environment. • Check power cord frequently. If power cord, plug or A/C is damaged, please don’t operate. If the power cord is not long enough, power extension cable can be used. Cable should not scatter at places where power cord may be pulled out or people may be stumbled.
Special Warning: • Place the A/C on even ground and install it vertically, so as to ensure normal operation of the compressor. • The A/C should be at least 50cm away from surrounding objects. Keep air inlet and outlet smooth. • Don’t use the A/C beside gasoline or any other inflammable liquid. • Don’t use spraying agent and other solvent or flammable substances near the A/C; otherwise, its plastic may deform and electric parts may be damaged.
3 4 1 2 5 8 9 7 10 6 11 12 5 www.SereneLifeHome.
Control Panel and Remote Controller Cool Fan High Dry Mid Low Cooling Model 1. Power key 4 Press the key to turn ON/OFF the A/C. 2. Swing key Press this key at any time after turning on the A/C to swing the wind guide bar automatically. 3 3. Speed key Press the key to choose high/ low gear 2 wind speed. 6 4.
Product Operation Placement and Installation Placement • Place it at even and dry place, and keep it at least 50cm away from its surrounding object. Installation • Screw the exhaust duct assembly in the air outlet behind the panel (counterclockwise). 7 www.SereneLifeHome.
• Insert the air exhaust hose into the window sealing plate, adjust opening width of window so that the window can match with the sealing plate properly; length of the sealing plate is adjustable. Incorrect Installation • It’s important to keep the exhaust duct smooth. Incorrect installation will affect work of the A/C. • Prevent the exhaust duct from sharp bending. • Ensure air can flow smoothly in the duct. Warning: The exhaust duct is designed especially for this model.
OPERATION METHOD Cooling Mode • When the A/C enters cooling mode automatically or cooling mode is selected after power ON, the cooling indicator lamp lights up. • Press Up/Down key to adjust setting temperature (16°C~30°C)(60°F~86°F). • Press Speed key to choose High/Mid/Low speed. Fan Mode • When pressing mode key or choosing Fan mode by pressing the remote controller, the wind indicator lamp lights up. • Press Speed key to choose High/Mid/Low speed. • Temperature can’t be set.
Auto mode (for cooling model only) • When pressing mode key or choosing auto mode by pressing the remote controller, the auto indicator lamp lights up. • After choosing Auto mode, operation state is determined by environmental temperature: when environmental temperature is higher than 25°C (77°F), the operation state is the same as that of cooling mode; when environmental temperature is lower than 25°C (77°F), the operation state is the same as that of fan mode.
MAINTENANCE Notice: In order to avoid electric shock, please turn off the A/C and unplug before maintenance or repair. CLEANING • Unplug before cleaning. • Wipe with soft semi-dry cloth. Don’t use chemical reagent, such as benzene, alcohol and gasoline etc; otherwise surface of the A/C and even the whole A/C will be damaged. • Prevent water from spattering in the A/C. FILTER SCREEN • Vacuum the filter screen once every two weeks. If it is blocked by dust, efficiency of the A/C will be reduced.
SEASONAL CLEANING If the A/C will not be used for a long time: • Pull out the water plug to drain. • Run the A/C in fan mode for 2H till the inside is dry. • Turn off the A/C and unplug. • Wash the filter screen and reassemble it. • Dismantle the exhaust duct and keep it properly. • Cover the A/C with a plastic bag and place it at a dry place.
Troubleshooting In case of any of the following trouble, please contact professional maintenance personnel in time. TROUBLE CAUSE SOLUTION The A/C doesn’t No display Reset circuit breaker on AC cord work The display panel displays “FL” Restart the A/C after power off and draining, then it will become normal Time OFF function is started The A/C can be restarted 3 minutes after being turning off.
