by PSLHTM20 Cordless Handheld Grass Cutter Shears Electric Hedge Shrubber Trimmer Built-in 3.6V Rechargeable Battery (Changeable Blades) www.PyleUSA.
CAUTION: Read all safety regulations and instructions. Failures made in following the safety regulations and instructions may result in an electric shock, fire and/or serious injury. Keep all safety regulations and instructions in a safe place for future use. The term “electric tool“ is used in the safety regulation that refers to electric tools operated from the mains power supply (with a power cable) and to battery operated electric tools (without a power cable). 1.
4. USING THE TREATMENT OF ELECTRIC TOOLS. • Do not overload your tool. Only use suitable electric tools to perform your work. Using the right electric tool allows you to work better and safer within the tool’s quoted capacity range. • Do not use an electric tool whose switch is defective. An electric tool that no longer can be switched on or off is dangerous and must be repaired.
• Protect the battery charger and its cable from damage and sharp edges. Have damaged cables repaired without delay by a qualified electrician. • Make sure that the contacts of the battery pack do not come into contact with other metallic objects such as nails or screws. There is a risk of short-circuiting. • Use only battery charges that are intended for the battery pack in question. • Do not use damaged battery chargers. • Leave repairs strictly to the appointed service center or authorized dealers.
4 www.PyleUSA.
1. Grass Cutter Blade 2. Shrub Cutter Blade 3. Safety Lock-off 4. ON/OFF Button 5. Blade Guard 6. Battery Charger PROPER USE The equipment is designed for cutting the edges of lawns and small areas of grass in private and hobby gardens. Tool for private and hobby gardens are not suitable for use in public figures, parks and sport centers, along roadways, on farms or in the forestry sectors.
Changing the blades IMPORTANT! Risk of injury! To remove the blades, raise the lug (Fig 4 / Item 1) and push off the cover (Fig. 4 / item 2) in direction of the arrow. Once you have removed the blade you will be able to see the toothed wheels of the gear unit (Fig. 5). Make sure that no dirt gets into the gear unit when you change the blade. To assemble, proceed in reverse order. When you fit the grass cutter blade, check the position of the pin for the eccentric connector (Fig. 5 / Item 1).
by
