User Manual

www.SereneLifeHome.com
9
STEP 4. SAFETY POLES ASSEMBLY
Plastic Caps (#20, 21) are pre-attached to the top of Upper Net Poles (#7, 8).
Slide the Upper Net Poles (#7) into Lower Net Poles (#9), 5 sets in total.
Connect Upper Net Pole(for putting up basketball hoop) (#8) to Lower Net Pole (#9) with Inner Hexagonal
Bolt M6*16mm (#10) and Washer (#13), secure with L-Shape Wrench (#17).
Place the Lower Net Pole (#9) next to the Frame Tube (#1) and Leg Tube (#2). Slide the Eye bolt M6
*70mm (#12) from the bottom of the Lower Net Pole (#9), and insert it through the Black Plastic Spacer
(#14) and the top hole on frame, secure it with Washer (#13) and Nut (#15) with Wrench (#18).
Secure the bottom hole with Bolt M6*65mm (#11), Black Plastic Spacer (#14), Washer (#13) and Nuts
(#15) with Wrench (#18).