User Manual

STEP 6. BASKETBALL SYSTEM ASSEMBLY

•

Connect the Rim (#24), Basketball Backboard (#23) and Basketball Hoop Connecting Tube (#22) with Inner

Hexagonal Bolt M6*25mm (#28), Washer (#13) and Locknut (#29), tighten them with L-Shape wrench

(#17) and Wrench (#18).

•

Put the assembled Basketball backboard above Upper Net Pole (#8), slide it into Upper Net Pole (#8)

until you hear a crackling sound, which means the hole of the Basketball Hoop Connecting Tube (#22)

has been aligned with the double-ended snap (as shown) on Upper Net Pole (#8). Make sure that the

board is well connected to the Upper Net Pole (#8), otherwise the board may fall down and do harm to

the user.