User Manual

www.SereneLifeHome.com12

STEP 9

Hardware Needed:

Accessory Holder 3.PCS

M6 Lock nut 2.PCS

M6x15mm Phillips Head Machine Bolt 2.PCS

H16

Accessory Holder

• Assemble Accessory Holder by positioning one of the plastic pieces over one of the pre-drilled holes on the H frame.

• Screw into the frame with a bolt (H19).

• Secure the middle metal piece by tightly tting it between the two plastic pieces.

• Finish the assembly by screwing in the other plastic piece with a bolt (H19).

• If assembled correctly, the metal holder should t snug between the two plastic holders.

H19