User Manual

Figure 1

of this chapter). After the water is emptied, the machine will automati

cally return to the original state.

3.3 Automatic Defrosting (cooling models have this function):

The machine has automatic defrosting function: during defrosting,

heating symbol on the display screen will ash.

3.4. Protection Function of the Compressor

To increase the service life of the compressor, it has a 3-minute delay

booting protection function after the unit is turned o and on again.

V. Drainage Instructions

1. Manual Drainage:

1. When the machine stops after the water is full,

turn o the machine power and unplug the

power plug.

Notes: Please move the machine carefully, so as

not to spill the water in the water pan at the

bottom of the body.

2. Place the water container below the side water

outlet behind the unit.

3. Unscrew the drainage cover and unplug the

water plug, the water will automatically

ow out the water container.

Notes:

1. Keep the drainage cover and the water plug properly set.

2. During drainage, the body can be tilted slightly backwards.

3. If your water container cannot hold all the water, before the water

container is full, stu the water outlet with the water plug as soon as

possible to prevent water from owing to the oor or the carpet.

4. When the water is discharged, re-insert the water plug, and tighten the

drainage cover.

Notes:

1. Restart the machine after the water plug and drainage cover are

installed, otherwise condensate water of the machine will ow to the

oor or the carpet.