SLGT15 15.
Apple and Mac OS are either registered trademarks or trademarks of Apple Corporation in United States and/or other countries. Any additional company and product name mentioned in this User Guide may be registered trademarks or trademarks. CONTENTS I. General Information INSTALLATION ON WINDOWS INSTALLATION ON MAC 3 5 10 II. Hot Keys 13 Scroll Dial 14 Pen 15 Pen Setting 15 Calibration 16 Save & Backup 18 III. Change the Pen Tip 19 IV. Take care of your Tablet Pen Display 19 V.
I. General Information OVERVIEW Discover how simple and innovative it is to control your computer using our Pen and LCD Pen Display instead of your mouse or track pad. The Monet Pen functions very similar to an art pen, being able to draw a line very thin or thick, light or dark. This is also known as pressure sensitivity. You can write, sign, annotate documents, draw, sketch, or paint as easily as you would on normal paper.
VERIFYING HARDWARE Your Graphics tablet and its packaged contents are shown below. If anything is missing, contact your dealer immediately. *P08 Battery-free Pen *Pen Nib Remover *Pen Nibs (3 hard, 3 soft) LCD Display USB cable Power cable HDMI cable Power adapter SETUP 1. Find 2 cables packaged with your Graphics tablet: a. USB (with safety lock) to PC USB b. HDMI to PC HDMI c. AC USB cable 4 www.SereneLifeHome.
2. Insert USB end of cable with safety lock into pen display. Insert USB end into computer. 3. Insert HDMI end of cable into Graphics tablet. Insert HDMI end into computer. 4. If pen display does not turn on right away, press the power button on the side of your pen display. AC ADAPTER SETUP 1. Find AC Adapter Accessories. 2. Plug in red power AC end into adapter. 3. Plug black male USB end into computer. 4. Plug male USB end of pen display cable into female end of cable.
3. When installing the driver, follow the installation instructions on your screen. Press Ok. 4. After the installation has completed, reboot your computer. 5. After you have finished the driver installation and restarted your computer. If the device has been successfully installed, you will see a small Tablet icon appear in the system tray, which is normally located at the lower right-hand corner of the screen.
USAGE TIPS Double Tapping To double tap with the Monet Pen (equivalent to a double click with a mouse), quickly lift the pen tip up away from the pen display before returning for the second tap. Scrolling Function of Digital Pen To scroll on a page, press the first button on the Monet Pen (same function as the middle button of mouse) over the pen display. If you have customized your Monet Pen, you must reset the button to Middle Button in the pen driver Pen settings in order to use this function.
2. In Multiple Displays dropdown, change to (Extend these displays). 3. If your computer is equipped with more than one monitor, your Graphics tablet will map to the monitors based on how they are configured in the DISPLAY PROPERTIES control panel. 4. After you have correctly configured your computer for multiple monitors, you can then adjust your Graphics tablet mapping by opening the panel and changing the appropriate options.
Display Configuration (for Windows) You may configure your Graphics tablet by modifying the functions of the pen tip and the two side buttons. • Tap on the Tablet icon in the system tray, usually located at lower right-hand corner of the screen. Driver Settings The Control Panel is divided into 5 tabs: • Devices • Calibration • HotKeys • Save & Backup • Pen Devices The Devices tab shows the device currently in use and the driver version being run.
INSTALLATION ON MAC 1. Download the driver from website 2. Go to Downloads at the top right-hand corner, or your Downloads folder in Finder. 3. Select the Tablet Driver package (decompress if needed) and follow the installation instructions shown on screen. 4. After installation has completed, the Driver application will be called Tablet Setting. For quick access, keep the application in your Dock.
Scrolling Function of Digital Pen To scroll on a page, press the first button on the Monet Pen (same function as the mouse middle button) over the Pen display. If you have customized your Monet Pen, you must reset the button to Middle Button in the Pen driver Pen settings in order to use this function. Traditional Mouse Setup You can have both the Graphics tablet and a traditional mouse setup to your computer at the same time. However, only one device is able to actively work at a time.
2. With the Graphics tablet connected, in Displays go to Arrangement. Here you can rearrange how displays are mapped to each other. How to Change to Mirror Display 3. In Arrangement, at the bottom left-hand of the window, select Mirror Displays if you want your main computer monitor and your Graphics tablet to show the same image. Display Configuration (for Mac) You may configure your Graphics tablet by modifying the functions of the pen tip, the two side buttons, and the FastAccess Buttons.
Devices The Devices tab shows the device currently in use and the driver version being run. Note: If nothing is shown in Device Information, make sure your Graphics tablet is properly connected to your computer. Unplug and re-plug if problem still persists. If the issue still persists, restart your computer. II. HOTKEYS Customize the Fast Access buttons and Quick Dial from the HotKeys tab. Redefine HotKey: Click on the title of the button. A dropdown menu will appear with a list of tool options.
Custom Define: At the bottom of the dropdown menu, choose Custom. This will allow you to input a custom keyboard shortcut. Note: Software keystrokes are based on English input methods. If not already, set to English when using HotKeys on your Tablet pen display. Note: Most creative software will not accept keystroke inputs when your Monet Pen is still in use or when your Monet Pen is still within the detectable cursor range.
Pen Pen Button Settings: Customize the functions of the two side buttons on the Monet Pen. Click the button name and choose a function from the dropdown menu. Double Click Speed: Move the slider toward “Slow” if you want more time inbetween double tapping the pen tip. Move the slider toward “Fast” if you want less time in-between double tapping the pen tip. Pen Pressure Setting: Move the slider in the sensitivity bar to adjust pen pressure response.
Pen Pressure: Using the Monet Pen, press down in the white rectangle. Use different levels of pressure to test if pen pressure sensitivity is working on your computer. Note: Please close the Tablet Control Panel when finished with the Pressure test. Monitor: If working in Extended Display, choose which monitor you want your Tablet pen display to track with. Most likely, you will want it to track with the pen display.
Open Monitor Tuner: Monitor Tuner can help you configure the Graphics tablet display’s Brightness, Contrast, and Color Temperatures. Press “Open Monitor Tuner” to open “Tablet Monitor Tuner” utility Calibrate Display Options: These options are there to assist you with preparing your designs for CMYK printing.
Note: The “Calibrated Pen Displays” are only there to assist you, to prepare your work for best accuracy before CMYK printing. Refer to guidelines set by your printing services. Note: When opening Pen Monitor Tuner, the system will need up to 30 seconds or more to access the necessary information for your monitor. While the system is calling up the Tuner, it is possible for the screen to flicker once or twice. Save & Backup Preference Settings: Save your settings.
III. CHANGE THE PEN TIP 1. You will need the pen nib removal tool . 2. Use the pen nib removal tool to pull out the pen nib. 3. Push the new pen tip into tip into the Monet Pen. 1 2 3 4 IV. TAKE CARE OF YOUR TABLET PEN DISPLAY 1. Keep the Monet Pen and the LCD screen surface clean. Dust and dirt particles can stick to the pen and cause excessive wear to the screen protector. a. Wipe the LCD screen gently with a soft cloth. b. Stubborn stains may be removed with a screen-cleaning cloth. 2.
V. SETTINGS FOR GRAPHIC APPLICATIONS Some applications need their settings changed so the Graphics tablet can act just the way you like. A. SAI a. Find [misc.ini] in SAI folder. b. Right click on [misc.ini] and select “Edit.” c. Find Tablet > Mouse > Simulation = 0, then modify 0 to 1 and save the file. d. Restart SAI. B. SAI 2 a. Find [Sai2.ini] in SAI folder. b. Right click on misc.ini and select “Edit.” c. Find “AlwaysUseTabletPCApi= no” then modify no to yes and save the file. d. Restart SAI 2. C.
D. Clip Studio Paint a. Run Clip Studio Paint and press Ctrl + K to open [Preferences]. b. Select “Tablet.” c. In “Using tablet services” select Tablet PC. d. Press OK and restart Clip Studio www.SereneLifeHome.
Questions? Comments? We are here to help! Phone: (1) 718-535-1800 Email: support@pyleusa.
